DIY Ballard Designs Inspired Media Stand

Howdy!  It’s been a while since I’ve been able to find time to update the blog!  With a 2 year old and a 9 month old now crawling around, it’s been tough to get much of anything done!  If you’re new here – welcome!  I have lots of tutorials and DIYs around here.  And if you’re here to see the media stand I just finished building, I’m so excited to share it with you!  It took over 2 months of nap times but it’s finally done!  This actually isn’t the first sideboard/media stand I’ve built like this.  My first one can be seen here and the second one (which is the TV stand in my current home) can be seen here.

And another fun note – I’ve been building not one, but TWO sideboards simultaneously the last 2 months.  My favorite part is that they have the same frame & body, but have different door styles which is giving them 2 TOTALLY different looks.  It is seriously so cool to see how the same overall piece of furniture can suit two completely different styles of decor.  Maybe I’m the only one geeking out here, haha!  Let me show you what I’ve been working on the last few months.

heather

So here is a gorgeous media stand my dear friend Heather wanted to purchase from Ballard Designs.  She loved the style, and was about to pull the trigger on it.  But when she told me she was about to buy it, I just couldn’t let her do it.  The price was too high considering I knew I could build one just like it that suited her needs even better than the one from Ballard.  So that’s what I did!  I offered to build her this because I was already planning to build the similar one for my mom, and building 2 simultaneously is easier than 2 separately.  I’m almost finished building my mom’s and I’ll be sharing that one on the blog soon, too!

I used a combination of 2 tutorials for this build.  The Ana White/Shanty2Chic Restoration Hardware Sideboard plans in combination with the Build Something Farmhouse Media Cabinet plans.  I used the Ana/Shanty plans for the body/carcass/trim and use the Build Something plans for the doors.  If you haven’t built anything before, or anything like this at least, I highly recommend building one of them exactly like the plans to start with.  Without altering any of the dimensions.  That’s what I did with my first sideboard build to get my bearings.  From there I felt much more comfortable and was able to start customizing things to my liking!

IMG_2921

I won’t go over every single step in detail because there are so many steps in building something like this.  I’m going to share the major highlights and any little tips/tricks I learned along the way.  The detailed plans that I linked above are great to follow for the nitty gritty.  I’m just sharing my rendition.  And for reference I customized the overall size of this one to be 70″ wide, 30″ tall and 20″ deep.

Contrary to either of the plans websites, I like painting all of my wood pieces before assembly.  It’s totally personal preference but I just find it easier than trying to paint in all the nooks and crannies at the end.  So you’ll see in the pictures above and below, I cut all of the pieces for the carcass and sides, and then I painted them before assembling.   For the body I use 3/4″ birchwood plywood from Lowe’s and the trim on the sides are 1×3 select pine also from Lowe’s.

IMG_2943

I drilled my pocket holes prior to painting as well, so that I could paint over the holes they made.  I use my K5 KregJig for almost every single build and it is hands down one of my favorite tools to have!!  Below are the sides of the media stand and the top and bottom.

IMG_2974

IMG_2976

Below is the body assembly, as well as a cute little helper 🙂

IMG_2987

After the body is assembled, I add the face frame.   The face frame is made with 1×3 and 1×4 select pine boards and attached together with my kregjig.  I then attach it to the body with finishing nails and my nail gun.

IMG_3095

After the face frame is on I add decorative molding to the top and bottom.  This is where you can personalize the piece and make it your own.  I used the same exact baseboard on the bottom of the sideboard that I have in my house.  It’s 5.25″ baseboard molding and the top is this chair rail molding from Lowe’s.

IMG_3151

Below is a shot from the top of the media stand looking down.  THIS IS REALLY IMPORTANT in my opinion.  NONE of the tutorials address this.  But you have a culmination of different wood seams meeting up in one area: the body, the face frame, and the trim.  And it looks HIDEOUS right??  On my very first attempt at building this piece, I tried to use wood filler, sanding, more wood filler, caulking etc to make it all look flush and it still looked HIDEOUS.  So I decided to add a very thin wood top to the entire piece.

IMG_3152

Below is the 1/8″ plywood top I added.  I cut it to size using my ryobi table saw and painted it white the same as the sideboard.  (By the way – the white I used is Sherwin Williams Dover White in a semi-gloss finish.)  This looks MUCH better in my opinion, and it’s thin enough that it looks like it’s part of the top molding and you don’t notice the difference at all.

IMG_3156

IMG_3157

Now on to the doors!  I was honestly so excited to make these doors because they were so different than anything I’ve ever done.  Heather wanted 2 glass doors in the center for her TV equipment and 2 solid doors on the outside, one to hide toys and things, and the other to hide a big speaker they’ve had sitting on the floor.  That’s the beauty of making this custom for her!  It would have never been able to fit in the Ballard media stand!

IMG_3245

I used 1×3 select pine boards for the frame of the doors and 5/8″ square rods for the cross.  The frame is attached together with pocket hole screws and the rods are attached with wood glue and pin nails and staples.  I also routed out an 1/8″ deep notch around the back side of the doors which you will see below.  I stained the doors in minwax special walnut.

IMG_3494

Below you can see the notch I routed out in the back of the doors.  This is where the 1/8″ glass sits for the glass doors and it’s where the 1/8″ white plywood sits that I used for the solid white doors.  I routed out the notch in the 1×3 pine boards BEFORE I assembled the door frame with pocket hole screws.  I used silicone adhesive to attach the glass to the wood, and added these glass door holders for an extra layer of safety.

IMG_3678

For decoration, I added these corner brackets to the doors, and these long handles, both from Lowe’s.  Both of them came in a chrome finish, and we wanted a flat black to achieve the look.  I used a flat black spray paint from Lowe’s.

IMG_3493

IMG_2948

I used small butt hinges from Lowe’s for the doors, but more importantly, I used THIS tutorial for how to install the doors using them.  I am SO glad I found this tutorial because it seriously saved me a ton of headache.  I attempted to install my own butt hinges on the last 2 sideboards I made, and had to do them completely face out because I could not get them to be concealed while making the door flush.

IMG_3264

Below you can see a good progression (from right to left) of how I made the doors.   I cut the 1×3’s, drilled pocket holes, routed the edges, assembled frame, attached crosses, stained, added decorative hardware, and attached with hinges.

IMG_3417

The last part for the doors is to install a closing/locking mechanism.  I’m not sure what the “proper” way to do this is, as I kind of made it up on my own.  I used these very inexpensive cabinet catches and screwed them into a scrap piece of wood that is attached to the back of the face frame.  There’s a better picture below.

IMG_3679

And finally, I used a sheet of this white material cut to size with my table saw to attach to the back of the sideboard.  I easily cut slits in it for their cords to feed through.  Here is the finished media stand!

media stand farmhouse tutorial ballard designs sideboard

media stand farmhouse tutorial ballard designs sideboard

media stand farmhouse tutorial ballard designs sideboard

media stand farmhouse tutorial ballard designs sideboard

media stand farmhouse tutorial ballard designs sideboard

media stand farmhouse tutorial ballard designs sideboard

media stand farmhouse tutorial ballard designs sideboard

media stand farmhouse tutorial ballard designs sideboard

And here is is all styled in her new home!!  Look how perfectly everything fits inside – especially the big speaker on the right which we custom fit!

heather2

Comment and let me know your thoughts and questions!  I love hearing from you guys!  Is this something you would attempt?

 

Site by Drop Cap Design | Photos by Penlight Media

privacy | Copyright © 2024 Frills and Drills

Butler Medium
Poppins Semi Bold